SIHL TriSolv PhotoArt Paper 210 Glossy
The SIHL TriSolv PhotoArt Paper 210 is an upgrade to the highly successful TriSolv PrimeArt range and is a multi-layer bright white coated paper with a water and weather resistant gloss surface. The SIHL TriSolv PhotoArt Paper 210 has been specifically developed for solvent latex and UV curable inks this FSC certified paper has faithful colour reproduction and accelerated drying time properties making it ideal for prints with high ink saturation. This water-repellent product can be stuck to a wide range of smooth substrates such as wood or metal with wallpaper paste or double-side adhesive tape as easily as papering a wall. Prints are long-lasting and offer high scratch resistance and durability even without additional lamination.
The SIHL TriSolv PhotoArt Paper 210 is available in widths of 36”, 42”, 54”, 60”, 63" and 64" (914mm, 1067mm, 1372mm, 1524mm, 1600mm and 1620mm), 45m long.
- Excellent colour brilliance
- Photorealistic reproductions
- Homogeneous gloss in printed and unprinted areas
- Water-repellent surface
- High stiffness
- High scratch resistance
- FSC® certified
- Environmentally friendly
- Wall & ceiling
- Large format photo
AEC/Photographic/Proofing/Fine Art/Graphic Design
Width / Size / Capacity:
36in/914mm, 42in/1067mm, 54in/1327mm, 60in/1524mm, 63in/1600mm and 64in/1620mm
Latex, Solvent and Eco-Solvent, UV Curable
Latex, Solvent and Eco Solvent, UV Curable
This media will be fit for purpose and free of manufacturing defects 90 days from date of purchase.
Please note when printing with any of the 300 and 500 series HP Latex printer, to print roll to roll!
The ink amounts must be adjusted for the paper. Please reduce the single colours cyan, magenta, yellow and black (ink restrictions) and lower the ink limit. This will not only help keep costs down but will also improve your drying performance.
Please follow the recommondations the printer and ink manufacturer provide. To achieve desired results please check the preheating and drying temperatures of the media before printing.
Pasting application: after soaking, the paper should be kept in a seated plastic box to ensure sufficient wetness. We recommend keeping the TriSolv Paper wet for at least eight hours. Longer periods of time won’t have a negative impact on it. The user is responsible for appropriate microbiological precautions.
In the event that the paper is exposed to severe climatic conditions, or if it needs to be used for a longer period of time, lamination is recommended. It is advisable to protect the edges and corners especially if the billboard hoarding is regularly cleaned.
To maintain the high quality of the paper, it should be stored and converted in a climate of 30 – 65 % relative humidity and at temperatures of 10 – 30 °C (50 – 86 °F).
Please note Latex / IR hardening ink is not fully water-resistant.